HPE FlexFabric 12900E Command Reference Manual page 31

Predefined user roles
network-admin
Parameters
interface-type interface-number: Specifies a physical interface by its type and number.
interface-name: Specifies a physical interface in the interface-typeinterface-number format. No
space is allowed between the interface-type and interface-number arguments.
mode enhanced: Sets the binding mode to enhanced for the IRF physical interface. The binding
mode is always the enhanced mode regardless of whether you specify this keyword.
Usage guidelines
Execute this command multiple times to bind multiple physical interfaces to an IRF port. You can bind
a maximum number of eight physical interfaces to an IRF port.
In IRF mode, use the shutdown command to shut down a physical interface before you bind it to or
remove it from an IRF port. To bring up the physical interface after a binding or binding removal
operation, use the undo shutdown command. In standalone mode, the shutdown and undo
shutdown operations are not required.
The binding mode takes effect only when the physical interface is bound to an IRF port.
The system does not dynamically remove IRF port bindings when IRF links are lost, for example,
because an interface module is removed. To remove IRF port bindings, you must use the undo port
group interface command.
For more information about IRF port binding requirements, see IRF Configuration Guide.
Examples
# (In standalone mode.) Bind HundredGigE 1/0/1 to IRF-port 1.
<Sysname> system-view
[Sysname] irf-port 1
[Sysname-irf-port1] port group interface hundredgige 1/0/1
# (In IRF mode.) Bind HundredGigE 1/1/0/1 to IRF-port 1/1 on IRF member 1.
<Sysname> system-view
[Sysname] interface hundredgige 1/1/0/1
[Sysname-HundredGigE1/1/0/1] shutdown
[Sysname-HundredGigE1/1/0/1] quit
[Sysname] irf-port 1/1
[Sysname-irf-port1/1] port group interface hundredgige 1/1/0/1
[Sysname-irf-port1/1] quit
[Sysname] interface hundredgige 1/1/0/1
[Sysname-HundredGigE1/1/0/1] undo shutdown
Related commands
irf-port
28