Table of Contents
Advertisement
SIGNAL CHECK
To refer to the input signal condition, press any switch
(Select Switch or Adjust Switch).
frequency and vertical frequency will be indicated.
Precision
Horizontal approximately
Vertical approximately
AUTOMATIC SIGNAL CHECK
When the monitor has detected the change of the signal input condition, the
monitor will indicate the condition automatically, as follows.
Condition
When the monitor detects
no sync. signal.
When the monitor will go
into the power saving
mode.
(Refer to page 16)
When the monitor detects
a sync. signal which is out
of set-up specification or is
unstable.
VIDEO MUTING
When the monitor has detected the change of the signal input condition, the
monitor
This function hides scrambled images which may appear during the changing
period
The muting period depends on the time that takes until the replaced signal
becomes stable.
±
± 2 Hz
Indication
The EasyMenu indicates the message
"POWER SAVE" for 5 seconds.
Verify power switch of the computer
and cable connection.
The LED of the power switch (
Verify power switch of the computer
and cable connection.
The EasyMenu indicates the message
"INVALID SCAN FREQ.".
Verify the specification of input signal.
mutes
the
of
The horizontal
frequency,
2
kHz
) flashes.
picture
the
input
Sample of
"EasyMenu"
Sample of "EasyMenu"
automatically.
signal.
15
Advertisement
Table of Contents
