POWER SAVING SYSTEM
This monitor complies with VESA and ENERGY STAR@ power saving requirements.
power saving system works only when used with VESA DPMS compliant PC's and/or
Table 1-2. Power Saving System
Power Saving States
95 W (typical)
Less than 10 W
Less than 3 W
! * When to switch the power Off during the monitor is in Active OFF mode, sometimes
~the power indicator lighting continues a few seconds.
It is not failure.
PLUG & PLAY
This monitor complies with VESA DDC1/2B specifications. Plug & Play is a system, by
which computer, peripherals (including monitors), and operating system manufacturers
comply with for this user-friendly function,
It works when the monitor is connected to
DDC ready computer that is running an operating system software that incorporates Plug
& Play functionality.
Your monitor is equipped with an automatic Signal Verification System.
The Table 1-3
below outlines the operation of this system,
Table 1-3. Signal Check
Indication of OSD
Power Indicator State
Proper signal is detected The OSD indicates the horizontal The power indicator lights
by the monitor.
frequency and vertical frequency green.
on the adjustment menu.
No Sync. Signal is detected The OSD indicates the message
by the monitor,
SAVE" for 5 seconds colour
I after which time the unit will turn I indicator
into Power Saving Mode,
A video signal is applied The OSD indicates the message
The power indicator will
is "INVALID SCAN FREQ.",
be illuminated as a solid
beyond the monitor scan