Table of Contents
Advertisement
OTHER FUNCTIONS (continued)
DVD Player/STB Selection (continued)
Set up hint
Example) HITACHI DVD
To operate HITACHI DVD player, press and hold the
followed by the
button.
1. Press
button to indicate the lamp of DVD on the remote
control.
During LED lighting, press
2. Release the
button once while keeping
the
button again to set the make type.
* After set up the maker type, press the button related with
DVD, and make sure that DVD player is working. In case
DVD player does not work, repeat 1 and 2 with other
numbers for the maker type to make sure it. (In this example,
press
or
.)
NOTE
• Not all models of the listed brands can be operated using
this remote control.
Signal Check (RGB)
Changes in the signal status are displayed on the screen as they arise.
Status
When Mode Display is set to ON,
the input signal is switched or
when the RECALL button is
pressed.
When the sync signal is no
longer detected.
When the input signal does not
match the monitor specifications
or is in an unstable status.
button,
and
to set up the maker.
button, press
Display
A guide is displayed for the input
terminal and the horizontal and
vertical sync frequency.
• A guide displays No Sync.
Signal, and Power Save (for
approx. 5 sec.)
• When the condition continues
where the sync signal cannot
be detected, indicator lamp of
power source changes in
orange and the mode switches
to power save mode.
A guide displays Invalid Scan
Freq.
Action
Recheck the personal computer
power switch status and the
connection status.
Recheck the input signal
specifications.
~
54
57
RGB
-- -- Min.
OFF
-- -- : -- --
! No Sync. Signal
! Invalid Scan Freq.
RGB2
RGB
H : 48.4kHz
V : 60.1 Hz
49
Hide quick links:
Advertisement
Table of Contents
