Avaya 1010 User Manual page 59

Code Problem
5 Upgrade script failed
6 Unable to run upgrade script
7 Unable to mount upgrade
partition
8 No permission
9 Corrupt image
10 Bad argument
11 Invalid signature
12 Decrypt failed
13 Developer system
14 Upgrade in progress
Avaya 1010/1020 User Guide
Description
After the image has been successfully uploaded the system runs
an upgrade script for final processing. This error indicates a
failure in that script. This typically occurs when using an upgrade
image for another Avaya product.
The system was unable to run the upgrade script. This typically
occurs when using an upgrade image for another Avaya product.
After the image has been copied to the system, the system failed
to mount the image. This typically occurs if the upgrade image is
corrupt or when using an upgrade image for another Avaya
product.
The system failed to read the upgrade partition.
The upgrade image is corrupt and unusable. This typically occurs
due to a bad image or errors during upload to the device.
An invalid argument was submitted to the upgrade process. This
typically occurs when using an upgrade image for another Avaya
product.
The encryption signature is invalid. This typically occurs if the
image is corrupt or compromised.
The system was unable to decrypt the upgrade image. This
typically occurs if the image is corrupt or compromised.
The system is configured for development and can only be
upgraded by an Avaya representative.
An upgrade is already in progress. The system only supports one
upgrade at a time.
59