Start, Stop, Direction, And Speed Control; Display, Control, And Navigation Keys - Allen-Bradley PowerFlex 523 Quick Start Manual

PowerFlex 520-Series Adjustable Frequency AC Drive

Start, Stop, Direction, and Speed Control

Factory default parameter values allow the drive to be controlled from the keypad. No programming is required to start,
stop, change direction, and control speed directly from the keypad.
IMPORTANT To disable reverse operation, see A544 [Reverse Disable].
See Fault Codes on page 29

Display, Control, and Navigation Keys

PowerFlex 523
FWD
Esc Sel
PowerFlex 525
FWD
ENET LINK
EtherNet/IP
Esc Sel
Key Name Description
Up Arrow Scroll through user-selectable display parameters
or groups.
Down Arrow
Increment values.
Escape Back one step in programming menu.
Cancel a change to a parameter value and exit
Esc
Program Mode.
Select Advance one step in programming menu.
Sel
Select a digit when viewing parameter value.
Enter Advance one step in programming menu.
Save a change to a parameter value.
16
www.aotewell.com
for an explanation of the fault codes.
Menu Parameter Group and Description
Basic Display
Commonly viewed drive operating conditions.
Basic Program
Commonly used programmable functions.
Terminal Blocks
Programmable terminal functions.
Communications
Programmable communication functions.
Logic (PowerFlex 525 only)
Programmable logic functions.
Advanced Display
Advanced drive operating conditions.
Advanced Program
Remaining programmable functions.
Network
Network functions that are shown only when a comm
card is used.
Modified
Functions from the other groups with values changed
from default.
Fault and Diagnostic
Consists of list of codes for specific fault conditions.
AppView and CustomView
Functions from the other groups organized for specific
applications.
Rockwell Automation Publication 520-QS001A-EN-E - March 2014
sales@aotewell.com
PowerFlex 525 Embedded EtherNet/IP Indicators
No. Display
ENET
LINK
No. LED
FAULT
Key Name Description
Reverse Used to reverse direction of the drive. Default is
active.
Controlled by parameters P046, P048, and P050
[Start Source x] and A544 [Reverse Disable].
Start Used to start the drive. Default is active.
Controlled by parameters P046, P048, and P050
[Start Source x].
Stop Used to stop the drive or clear a fault.
This key is always active.
Controlled by parameter P045 [Stop Mode].
Potentiometer Used to control speed of drive. Default is active.
Controlled by parameters P047, P049, and P051
[Speed Referencex].
Industry Automation
Display
State Description
Off Adapter is not connected to
the network.
Steady Adapter is connected to the
network and drive is
controlled through Ethernet.
Flashing Adapter is connected to the
network but drive is not
controlled through Ethernet.
Off Adapter is not connected to
the network.
Steady Adapter is connected to the
network but not transmitting
data.
Flashing Adapter is connected to the
network and transmitting
data.
LED State Description
Flashing Red Indicates drive is faulted.
+86-755-8660-6182