Xerox VersaaLink B600 User Manual page 102

Paper and Media
2. Remove any paper in the tray.
3. Adjust the paper length and width guides as illustrated.
4. Load envelopes in the trays with the flaps closed, flap-side down, and the short edge leading into
the printer.
Note
Do not load more than 50 envelopes into the tray, up to 45 mm (1.8 in.) in height.
5. Adjust the width guides until they touch the edges of the envelopes.
6. Slide the tray all the way into the printer.
7. If the Tray Mode is set to Fully Adjustable, the printer prompts you to set the paper type, size and
color.
a) If the paper type, size and color are correct, touch OK.
b) If the paper type, size or color are incorrect, change the settings.
• To select a paper type, touch the current paper type, then from the list, select Envelope.
6-20
® ®
Xerox VersaaLink B600/B610 Printer
User Guide