Connect To Electricity Supply - Belling G552 Enfield Users Manual & Installation Handbook

Connect to the electricity supply
(mains ignition models only)
Warning: This appliance must be
earthed.
The flexible mains lead is supplied
connected to a BS 1363 fused plug,
having a fuse of 3 amp capacity.
If this plug does not fit the socket in
your home, it should be replaced with
a suitable plug as outlined below.
E (Earth)
GREEN / YELLOW
N (Neutral)
BLUE
Use a 3 amp fuse
in a 13 amp plug.
The wires in the mains lead are
coloured in accordance with the
following code:
Green and yellow = Earth,
Blue = Neutral,
Brown = Live.
Installation Instructions
L (Live)
BROWN
21
As the colours of the wires in the
mains lead for the appliance may
not correspond with the coloured
markings identifying the terminals in
your plug, proceed as follows:
1. The wire which is coloured green
and yellow must be connected to
the terminal marked E
2. The wire which is coloured blue
must be connected to the terminal
marked N (Neutral).
3. The wire which is coloured brown
must be connected to the terminal
marked L (Live).
The plug and
accessible after installation.
Should the mains
appliance ever require replacing, we
recommend that this is carried out by
a qualified electrician who will
replace it with a lead of the same size
and temperature rating.
Important: - ensure that you route
all mains and electrical cables and
flexible tubing well clear of any
adjacent heat source.
(Earth).
socket must be
lead of the