Stability Bracket; Levelling - Belling G552 Enfield Users Manual & Installation Handbook

Stability bracket

If the cooker is fitted with a flexible
connection, a stability bracket should
be fitted to engage in the back of the
cooker. A stability bracket can be
bought from your local supplier.
A stability bracket can be fitted as
follows:
1. Place the cooker in position and
draw a
PENCIL LINE
front edge.
2. Mark the centre of the cooker to
give the
CENTRE LINE
3. Remove the cooker and mark off
450mm from the
locate the front edge of the lower
bracket.
Front edge for
lower bracket
Installation Instructions
level with the
for the bracket.
to
PENCIL LINE
Rear wall
3
450
mm
20
4. Fix the bracket to the floor.
Measure from
ENGAGEMENT EDGE
the cooker and add 3mm.
5. Assemble the underside of the top
part of the bracket to this height.

Levelling

Place a spirit level on a baking sheet
onto an oven shelf.
The cooker is fitted with levelling feet
at the front and rear.
Stability bracket
1 Pencil line
on floor
2 Centre
line
5 Underside of top bracket
4
slots into engagement
edge in back of cooker.
t o
F L O O R L E V E L
in the back of