Grilling - Belling G706 Installation And User Instructions Manual

16

GRILLING

IMPORTANT! BEFORE GRILLING, ALWAYS FIT THE
PROTECTIVE HEAT SHEILD, AS SHOWN BELOW. THIS
WILL PREVENT DAMAGE TO THE CONTROLS AND
SURROUNDING FURNITURE. GRILLING SHOULD
NEVER BE UNDERTAKEN WITH THE GRILL/TOP OVEN
DOOR CLOSED
NEVER allow young children near the appliance when
the grill is in use as the surfaces get extremely hot.
LIGHTING THE GRILL
Ensure that the hob glass cover is in the raised position,
open the oven door, push in and turn the grill control
knob in an anti clockwise direction to the full on position n
(G706 and G709) or in clockwise direction to the symbol
(DB60, G707 and G708). Keeping the knob pushed
in, press and hold the ignition button until the burner
lights.
Release the ignition button and keep the grill knob
pressed for approximately 15 seconds to allow for the
flame failure device to energise. If the control knob is
released too soon the flame will go out.
Reduce the grill setting if necessary by turning the knob
anti clockwise (G706 only and G709).
When lighting the grill, the oven door must always be
kept open. If after approximately 15 seconds the burner
has not lit, release the knob and wait at least 1 minute
before trying to relight. If the grill burner extinguishes
accidentally, turn the knob to the off position and wait
at least 1 minute before attempting to relight.
The grill pan, food support grid and grill pan handle are
assembled as shown on page 13. The grill pan handle
is clipped onto the grill pan by tilting the handle upwards
and clipping over the edge of the grill pan. Do not leave
the handle clipped on the grill pan when grilling as it
will become extremely hot.
G141