ITech IT6512D User Manual page 26

ReturnMeter
P-Out
CONFIG
Config menu
Load-Status
Static-Curr
CAN
Enables automatic delay to switch display from setting
to measured value ( meter).
Off( Def)
On
Power whether power supply was on
Off( Def)
Last
Setting the internal load status.
Off( Def)
On
setting the static current when output is Off status
Off
Copyright ©ITECH Electronics
Info: The information of LAN.
LAN Status: Down
IP Mode: Disconnect
IP Addr: 0.0.0.0
SubNet: 0.0.0.0
Gateway: 0.0.0.0
DNS1: 0.0.0.0
DNS2: 0.0.0.0
MAC: 8C:C8:F4:40:01:E1
MDNS Status:
HostName:
HostDesc:
Domain:
TCPIP::INSTR:
Socket Port: 30000
Config:
IP-Mode: Auto/Manual
Server-Config:
MDNS: On/Off
PING: On/Off
telnet-scpi: On/Off
Web: On/Off
VX-11: On/Off
Raw-socket: On/Off
Restore: Restore to factory defaults
Reset: Save all of setting, and the settings
take effect after restart.
Select CAN communication interface
250K: Baud rate
Addr: address of power supply
Prescaler: Prescaler
BS1 Value: Not settable
BS2 Value: Not settable
Auto return Meter function disabled.
Auto return Meter function enabled
After power on,the instrument will be in
the off state.
If output was on prior to turning the
power off,the ON state will be resumed
after power on.
Disables the dummy load ( default).
Enables the dummy load.
Turn off static current function (avoid current
flow-backward)
Co., Ltd.
Function and Features
19