Cisco XR12000 Series Configuration Manual page 63

Implementing Multicast Routing on Cisco IOS XR Software
Command or Action
Example:
RP/0/0/CPU0:router(config-ipv4-acl)# permit
239.1.1.1 0.255.255.255
Step 11 Use the commit or end command.
Step 12 clear pim [vrf vrf-name] [ipv4 | ipv6] bsr
Example:
RP/0/0/CPU0:router# clear pim bsr
Step 13 show pim [vrf vrf-name] [ipv4 | ipv6] bsr
candidate-rp
Example:
RP/0/0/CPU0:router# show pim bsr candidate-rp
Step 14 show pim [vrf vrf-name] [ipv4 | ipv6] bsr election
Example:
RP/0/0/CPU0:router# show pim bsr election
Step 15 show pim [vrf vrf-name][ipv4 | ipv6] bsr rp-cache
Example:
RP/0/0/CPU0:router# show pim bsr rp-cache
Step 16 show pim [vrf vrf-name][ipv4 | ipv6] group-map
[ip-address-name] [info-source]
Example:
RP/0/0/CPU0:router# show pim ipv4 group-map
OL-30405-02
Cisco IOS XR Multicast Configuration Guide for the Cisco XR12000 Series Router, Release 5.1.x
Configuring the Bootstrap Router
Purpose
commit—Saves the configuration changes, and remains within
the configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the
configuration session.
• No—Exits the configuration session without committing
the configuration changes.
• Cancel—Remains in the configuration mode, without
committing the configuration changes.
(Optional) Clears BSR entries from the PIM RP group
mapping cache.
(Optional) Displays PIM candidate RP information for the
BSR.
(Optional) Displays PIM candidate election information for
the BSR.
(Optional) Displays PIM RP cache information for the BSR.
(Optional) Displays group-to-PIM mode mapping.
53