Cisco XR12000 Series Configuration Manual page 157

Implementing Multicast Routing on Cisco IOS XR Software
183.31.1.0/24,
183.32.1.0/24
end-set
!
route-policy A2-Spoke-family
if destination in A2-Spoke-family then
pass
else
drop
endif
end-policy
!
router bgp 1
vrf A2-Hub-3in
rd 4000:3
address-family ipv4 unicast
route-target download
redistribute connected
!
neighbor 113.113.114.9
remote-as 12
address-family ipv4 unicast
route-policy A2-Spoke-family in ------à leaking the selected spoke routes with hub route targets so they can
be imported by the spoke sites with RPF A2-Hub-3in.
route-policy pass-all out
!
!
!
!
router bgp 1
vrf A2-Hub-3out
rd 4000:4
address-family ipv4 unicast
route-target download
redistribute connected
OL-30405-02
Cisco IOS XR Multicast Configuration Guide for the Cisco XR12000 Series Router, Release 5.1.x
Configuring Multicast Hub and Spoke Topology: Example
147