Label Switched Multicast (LSM) Multicast Label Distribution Protocol (mLDP) based Multicast VPN (mVPN) Support
Profile 21 : Rosen-IR with BGP C-multicast Routing
These are the characteristics of this profile:
• Full mesh of P2MP IR core-tree as the Default-MDT, with BGP C-multicast Routing.
• Only SFS (Highest PE or Hash-of-BGP-paths) is supported. Hash of Installed-paths method is not
supported.
• Default and Data MDT supported.
• Customer traffic can be SM, SSM .
• RPL-Tail-end-Extranet supported.
• Customer-RP-discovery (Embedded-RP, AutoRP & BSR) is supported.
• Inter-AS Option A and C- supported.
Profile 23 : Partitioned-IR with BGP AD/PIM C-multicast Routing
These are the characteristics of this profile:
• IR tunnels as the Core-tree protocol.
• All UMH options supported.
• Default and Data MDT supported.
• Customer traffic can be SM, SSM .
• RIB-Extranet, RPL-Extranet, Hub & Spoke supported.
• Customer-RP-discovery (Embedded-RP, AutoRP & BSR) is supported.
• Inter-AS Option A and C- supported.
Profile 25 : Partitioned-IR with BGP C-multicast Routing
These are the characteristics of this profile:
• Full mesh of P2MP IR core-tree as the Default-MDT, with BGP C-multicast Routing.
• All UMH options supported.
• Default and Data MDT supported.
• Customer traffic can be SM, SSM .
• RPL-Tail-end-Extranet supported.
• Customer-RP-discovery (Embedded-RP, AutoRP & BSR) is supported.
• Inter-AS Option A and C- supported.
Configuration rules for profiles
Rules for Rosen-mGRE profiles (profiles- 0, 3,11)
• All profiles require VPNv4 or v6 unicast reachability.
Cisco IOS XR Multicast Configuration Guide for the Cisco XR12000 Series Router, Release 5.1.x
34
Implementing Multicast Routing on Cisco IOS XR Software
OL-30405-02