Implementing Multicast Routing on Cisco IOS XR Software
• Customer traffic can be SM, SSM or Bidir (separate-partitioned-mdt).
• RIB-Extranet, RPL-Extranet, Hub & Spoke supported.
• Customer-RP-discovery (Embedded-RP, AutoRP & BSR) is supported.
Profile 10 : VRF Static-P2MP-TE with BGP AD
These are the characteristics of this profile:
• P2MP-TE tree, with static Destination list, in the core; no C-multicast Routing.
• Static config of (S,G) required on Head-end PE.
• Only C-SSM support on PEs.
• Support for IPv4 MVPN S,Gs on PEs. No support for IPv6 MVPN routes.
Profile 11 : Rosen-PIM/GRE with BGP C-multicast Routing
These are the characteristics of this profile:
• PIM-trees in the core, data encapsulation is GRE, BGP C-multicast Routing.
• Static config of (S,G) required on Head-end PE.
• For PIM-SSM core-tree and PIM-SM core-tree with no spt-infinity, all UMH options are supported.
• For PIM-SM core-tree with spt-infinity case, only SFS (Highest PE or Hash-of-BGP-paths) is supported.
Hash of installed-paths method is not supported.
• Default and Data MDTs supported.
• Customer traffic can be SM or SSM or Bidir (separate-partitioned-mdt).
• Inter-AS Option A supported. Options B and C not supported.
Profile 12 : Rosen-mLDP-P2MP with BGP C-multicast Routing
These are the characteristics of this profile:
• Full mesh of P2MP mLDP core-tree as the Default-MDT, with BGP C-multicast Routing.
• All UMH options supported.
• Default and Data MDT supported.
• Customer traffic can be SM or SSM or Bidir (separate-partitioned-mdt).
• RPL-Tail-end-Extranet supported.
• Inter-AS Option A, B and C supported.
Profile 13 : Rosen-mLDP-MP2MP with BGP C-multicast Routing
These are the characteristics of this profile:
• Single MP2MP mLDP core-tree as the Default-MDT, with BGP C-multicast Routing.
OL-30405-02
Label Switched Multicast (LSM) Multicast Label Distribution Protocol (mLDP) based Multicast VPN (mVPN) Support
Cisco IOS XR Multicast Configuration Guide for the Cisco XR12000 Series Router, Release 5.1.x
31