Cisco XR12000 Series Configuration Manual page 40

Label Switched Multicast (LSM) Multicast Label Distribution Protocol (mLDP) based Multicast VPN (mVPN) Support
Profile 5: MS-PMSI-mLDP-P2MP with BGP-AD
These are the characteristics of this profile:
• P2MP mLDP trees are used in the core.
• The multicast traffic can be SM or SSM.
• Extranet, Hub and Spoke, CsC, Customer-RP-discovery (Embedded-RP, AutoRP and BSR) are supported.
• Inter-AS Options A, B, and C are supported. . VRF-Route-Import EC is announced in VPN-IP routes.
Profile 6: VRF In-band Signaling (No BGP-AD)
These are the characteristics of this profile:
• P2MP mLDP trees are used in the core.
• MoFRR in the core is supported.
• There is one core tree built per VRF-S,G route. There can be no ( *,G) routes in VRF, with RPF
reachability over the core.
• The multicast traffic can be SM S,G or SSM.
Profile 7: Global Inband Signalling
These are the characteristics of this profile:
• P2MP mLDP inband tree in the core; no C-multicast Routing.
• Customer traffic can be SM S,G or SSM.
• Support for global table S,Gs on PEs.
For more information on MLDP implementation and OAM concepts, see the Cisco IOS XR MPLS
Configuration Guide for the Cisco XR 12000 Series Router
Profile 8: Global P2MP-TE
These are the characteristics of this profile:
• P2MP-TE tree, with static Destination list, in the core; no C-multicast Routing.
• Static config of (S,G) required on Head-end PE.
• Only C-SSM support on PEs.
• Support for global table S,Gs on PEs.
Profile 9: Rosen-mLDP with BGP-AD
These are the characteristics of this profile:
• Single MP2MP mLDP core-tree as the Default-MDT, with PIM C-multicast Routing.
• All UMH options supported.
• Default and Data MDT supported.
Cisco IOS XR Multicast Configuration Guide for the Cisco XR12000 Series Router, Release 5.1.x
30
Implementing Multicast Routing on Cisco IOS XR Software
OL-30405-02