Operation Mode - Daikin FDQ16PY1 Operation Manual

HOW TO OPERATE THE TIMER
hr
hr
STEP 1
STEP 3
• The above display indicates "AFTER 3 HOURS CUT OFF"
and "AFTER 4 HOURS TURN ON".
• The illustrations in this operating manual correspond to the
remote controller format BRC1C type.
• In the case of using a remote controller other than the
BRC1C type one, refer to the operation manual provided to
the remote controller.
To cancel program timer

OPERATION MODE

When you want to start the system after a time you desire
elapses:
Example
If you adjust the time
It indicates " hr (
After 8 hours from making a
reservation, the operation starts.
After the operation starts, the
reservation is cancelled.
10
STEP 2
to " ".
)".
STEP 1
Press button, and select "hr
(timer on). Pressing the button changes the display as follows:
"hr
STEP 2
Press button, and set the time you want.
When this button is pressed, the time advances by 1 hour.
When this button is pressed, the time goes backward by 1
hour.
The timer can be programmed a maximum of 72 hours.
STEP 3
Press button.
The timer setting is completed.
"hr " or "hr " display changes from flashing to on.
After the time is programmed, the display shows the
remaining time.
CANCEL
Press button again, and the display disappears.
When you want to stop the system after operating it for a
time you desire:
Example
If you adjust the time
It indicates " hr (
After 8 hours from making a
reservation, the operation stops.
After the operation stops, the
reservation is cancelled.
" (timer off) or "hr
No Display
" "hr "
NOTE
NOTE
to " ".
)".
English
"