Table of Contents
Advertisement
OPERATION PROCEDURE
"COOLING", "HEATING" AND "FAN" OPERATION
TEMPERATURE
• The above display is for COOLING OPERATION.
• The illustrations in this operating manual correspond to the
remote controller format BRC1C type.
• In the case of using a remote controller other than the
BRC1C type one, refer to the operation manual provided to
the remote controller.
OPERATION MODE
COOLING
8
[SET UP]
• To protect the unit, turn on the main power switch 6 hours
before operation.
To ensure that the unit starts smoothly, don't turn off the
power on season.
STEP 2
If the main power supply is turned off during operation,
operation will restart automatically after the power turns back
on again.
STEP 1
STEP 1
Press
MODE of your choice from "COOLING", "HEATING" and "FAN"
operation.
STEP 2
Press
OPERATION lamp lights up and the system starts OPERATION.
STEP 3
Set temperature
When operating at the beginning of a certain season or when
changing the setting, operate as desired in accordance with the
instructions on the following item.
HEATING
CAUTION
button several times and select the OPERATION
button.
FAN
Circulates air in the room.
English
Advertisement
Table of Contents
