Avaya 3616 Wireless Telephone and Desktop Charger
For SRP
Setting User Preferences
► (Right arrow)
◄ (Left arrow)
0 (Zero)
Power Off/End Call
User Option Menu
Ring Type
High Noise Mode
Current IP address
Extension
(Additional options may be present. Contact your system administrator for information.)
Page 14
When the Wireless Telephone is in standby mode (on but
not in use), press and briefly hold
options. Check with your system administrator for specific
features supported by your Wireless Telephone.
displays next menu item.
displays previous menu item.
selects or changes item.
FCN
returns to previous menu level.
exits menus
Select Telephone Ring to set the
standard ring on the Wireless
Telephone.
is the factory default ring.
Normal:
Vib/norm ring:
seconds and then rings.
: vibrates for a non-
Vibrator ring
audible call alert.
Adjusts the Wireless Telephone to
account for background noise.
: for most office
Normal
environments
: for moderate background
High
noise
: for extremely noisy
Severe
conditions.
In IP systems, the IP address of the
Wireless Telephone is displayed.
This number may not be edited.
This number is used to identify the
Wireless Telephone and is for
display purposes only.
FCN
Action:
Press 0 to select
desired ring type. The
ring type currently set
displays with an
vibrates for 5
asterisk.
Select an option that
describes the noise in
your environment.
None
Use keypad to enter
extension number.
to display user
555-301-719
Issue 2