Table of Contents
Advertisement
Chapter 4: AMI BIOS
Graphics OverClocking
GT Slice Domain
GT OverClocking Frequency
This option selects the Overclocked RPO frequency in multiples of
50MHz. The default is 0.
GT Voltage Mode
Use this feature to select the Overclocking GT mode. The options are
Adaptive and Override.
GT Extra Turbo Voltage
(Available when GT Voltage Mode is set to Adaptive)
Use this feature to set the extra voltage applied while GT is operating
in turbo mode. Specify a value from 0mV to 2000mV. Enter 0 to use
the manufacture default value.
GT Voltage Override
(Available when GT Voltage Mode is set to Override)
Use this feature to set the Override Voltage applied to the GT domain.
This voltage is specified in millivolts (mV) and uses the BIOS mailbox
MSR 0x150, command 0x11. Specify a value from 0mV to 2000mV.
Enter 0 to use the manufacture default value.
GT Voltage Offset
Use this feature to set the GT Adaptive voltage Target(mV) value from
0mV to 2000mV. Enter 0 to use the manufacture default value.
Offset Prefix
Use this feature to set the Offset value as a positive (+) number or
a negative (-) number. The default setting is "+".
GT Unslice Domain
GT OverClocking Frequency
This option selects the Overclocked RPO frequency in multiples of
50MHz. The default is 0.
GT Voltage Mode
Use this feature to select the Overclocking GT mode. The options are
Adaptive and Override.
4-41
Advertisement
Table of Contents
