Supermicro C7Z270-CG Motherboard User's Manual
Core Voltage Offset
Use this feature to set the CPU Voltage Offset value from -500mV to
+500mV. Enter 0 to use the manufacturer default value.
Offset Prefix
Use this feature to set the Core Voltage Offset value as a positive (+)
number or a negative (-) number. The default setting is "+".
Core PLL Voltage Offset
Use this feature to set the CPU PLL Voltage Offset value from 0-63
with each unit at 15mV. This is used to increase the range of the core
frequency in extreme overclocking conditions. Enter 0 to use the manu-
facturer default value.
Ring Max OC Ratio
Use this feature to set the maximum overclocking ratio for the RING
Domain. Enter a value or press "+" or "-" on your keyboard to change
the value.
Ring Min OC Ratio
Use this feature to set the minimum overclocking ratio for the RING
Domain. Enter a value or press "+" or "-" on your keyboard to change
the value.
Uncore Voltage Offset
Use this feature to specify the Offset Voltage applied to the Uncore
domain. Enter a value or press "+" or "-" on your keyboard to change
the value.
Offset Prefix
Use this feature to set the offset value as positive or negative. The op-
tions are + or -.
PCH Voltage
Use this feature to trim the PCH Voltage. Select from these values:
1.00V, 1.05V, 1.10V, 1.15V, 1.20V, 1.25V, and 1.30V.
CPU PLL Voltage
Use this feature to trim the CPU PLL Voltage. Select from these values:
1.20V, 1.25V, 1.30V, 1.35V, 1.40V, 1.45V, and 1.50V.
4-10