CPU_IO Voltage
Use this feature to calibrate the CPU I/O Voltage. Select from these
values: 0.975V, 1.15V, 1.30V, and 1.50V.
Load Line Calibration
Load line calibration is vDroop, which is the tendency for a CPU's vCore
to drop when going from an idle state to a load state. Set this feature
to auto, or select a specific level to reduce vDroop. The options are
Disabled, Level 1~7, and Auto.
PSYS Slope
PSYS Slope is defined in 1/100 increments and uses the BIOS VR mailbox
command 0x9. Valid range is 0-200. For example, enter 125 for a 1.25
slope. Enter 0 for AUTO.
PSYS Offset
PSYS Offset is defined in 1/4 increments and uses the BIOS VR mailbox
command 0x9. For example, enter 100 for a 25 offset. Valid range is
0-255.
PSYS PMax Power
The value is defined in 1/8 Watt increments and uses the BIOS VR mail-
box command 0xB. For example, enter 1000 for a 125 Watt PMax value.
Valid range is 0-8192. Enter 0 for AUTO.
Acoustic Noise Settings
Acoustic Noise Mitigation
Select Enable to help mitigate acoustic noise on certain SKUs when the
CPU is in deeper C-State. The options are Disabled and Enabled.
When the item above is set to Enabled, the following can be configured:
IA VR Domain
Disable Fast PKG C State Ramp for IA Domain
Select False to leave Fast ramp enabled during deeper C-States. Se-
lecting True will disable Fast ramp during deeper C-States. The options
are FALSE and TRUE.
4-11
Chapter 4: AMI BIOS