Passcode - Polycom 2490 User Manual And Administrator Manual

Passcode

When you select Passcode from the Admin Setup menu,
the screen will display whether or not a passcode is cur-
rently assigned.
Assign a passcode:
1. Press the Menu button
choose Admin Setup using the
Scrolling buttons
the Select button
Passcode using the Scrolling but-
tons , and press the Select
button
2. Press the
ASSIGN
a three-digit passcode. If you
make an error, press the
key to erase the error.
3. Press the
SAVE
press the
CANCEL
Exit button
to save the passcode.
►Record the passcode. If the passcode is forgotten,
contact Polycom Support at www.polycom.com/support
and click on "How to Contact Support and Service" for
your local support contact information.
Remove a passcode:
Removing the passcode removes the requirement for an
access passcode for the Admin Setup menu.
1. From the Admin Setup menu,
choose Passcode using the Scrolling
buttons
ton .
2. Press the
REMOVE
the current passcode, and press the
soft key. If you decide not to
ENTER
remove the passcode, press the
soft key or the Exit button
CEL
►If you enter an incorrect passcode,
you will be notified to try again.
►If you make an error, press the
soft key to erase the error.
<DEL
,
, and press
. Choose
.
soft key and enter
<DEL
soft key. You may
soft key or the
if you choose not
and press the Select but-
soft key, enter
SoundStation2 Avaya Administrator Guide - 27
ADMIN SETUP
LOCATION
PHONE SYSTEM
PASSCODE
PASSCODE
NOT ASSIGNED
ASSIGN
soft
ENTER NEW
Passcode:_
CANCEL
PASSCODE
ASSIGNED
CHANGE
ENTER CURRENT
Passcode:_
CAN-
.
CANCEL
INCORRECT PASSCODE
Passcode:_
CANCEL
<DEL SAVE
REMOVE
<DEL ENTER
<DEL ENTER