Table of Contents
Advertisement
8
SIP Specific Configuration
2.2 Configuring DECT System
When configuring the KWS600v3 in a SIP environment it is necessary to enable the check
boxes; Enbloc Dialing and DTMF through RTP channel.
1
Under the Configuration menu, click DECT, and then click System.
Figure 2 Adm. Page: Configuration/DECT/System page - SIP Protocol
2
Select the Enbloc Dialing check box.
The Enbloc Dialing check box has to be enabled in a SIP configuration in order for
the handset to collect all digits, before passing them on to a call handler for routing.
Select the DTMF check box.
3
The DTMF check box has to be enabled in a SIP configuration if DTMF tones are
needed (optional).
Click OK.
4
5
Click Reset (under Administration menu) to save your configuration.
2.3 Configuring Call Waiting
To enable the Call Waiting feature in the system, you must do the following:
14168600, Ed.2
Advertisement
Table of Contents
Need help?
Do you have a question about the KIRK Wireless Server 600v3 KWS600v3 and is the answer not in the manual?
Questions and answers