Supermicro SuperServer series User Manual page 64

SuperServer E200-9AP User's Manual
Default Options
Restore Defaults
To set this feature, select Restore Defaults from the Exit menu and press <Enter>. These are
factory settings designed for maximum system performance but not for maximum stability.
Save as User Defaults
To set this feature, select Save as User Defaults from the Exit menu and press <Enter>. This
enables the user to save any changes to the BIOS setup for future use.
Restore User Defaults
To set this feature, select Restore User Defaults from the Exit menu and press <Enter>. Use
this feature to retrieve user-defined settings that were saved previously.
Boot Override
This feature allows the user to override the Boot Option Priorities sequence in the Boot
menu, and immediately boot the system with another device specified by the user. This is a
one-time override.
UEFI: Built-in EFI Shell
UEFI: IP4 Intel I210 Gigabit Network Connection
UEFI: IP4 Intel I210 Gigabit Network Connection
64