Configuration File Parameter Changes - Polycom SOUNDPOINT 3804-11530-222 Release Notes

Release Notes - SIP Application
• 12284: Time handling for DHCP needs to be improved
• 12289: Common audio equalization tables should be grouped together
• 12323: Exiting Display Diagnostics with termination key does not stop display
diagnostics
• 12333: "Direct" and "Group" soft keys can appear when directed and group
call pickup features are disabled
• 12370: Ringing can be heard during a connected call mixed with audio when
there is a high number of unanswered incoming calls
• 12541: Error messages can appear in log file after putting two calls on hold

2.23.4 Configuration File Parameter Changes

.cfg Action Parameter
File
sip added voIpProt.SIP.allowTransferOnProceeding
sip added voIpProt.SIP.outboundProxy.transport
sip added voice.gain.rx.analog.chassis.IP_601,
voice.gain.rx.analog.ringer.IP_601,
voice.gain.rx.digital.chassis.IP_601,
voice.gain.rx.digital.ringer.IP_601,
voice.gain.tx.analog.chassis.IP_601,
voice.gain.tx.digital.chassis.IP_601,
voice.gain.tx.analog.preamp.chassis.IP_601
sip changed voice.aec.xxx
sip changed voice.ns.xxx
sip added/ voice.rxEq.xxx
removed
sip added/ voice.txEq.xxx
removed
sip added log.level.change.sotet,
log.level.change.ttrs
Copyright © 2007 Polycom, Inc.
Description
0 = don't allow transfer during
consultation call proceeding state
1 = do allow it (1 is the default)
Same function and possible values as
existing voIpProt.server.x.transport
parameter. Default is DNSnaptr.
Gains specifically for the IP 601
platform.
Changed parameter values. Do not
modify these.
Changed parameter values. Do not
modify these.
This whole section has changed and
must be used. Do not modify these.
This whole section has changed and
must be used. Do not modify these.
Added log level control for logging
related to Expansion Module.
Changes
Page 53