Configuration File Parameter Changes; Added Or Changed Features; Removed Features; Corrections - Polycom SOUNDPOINT 3804-11530-222 Release Notes

Release Notes - SIP Application
• 15162: Phone clears application log file during a warm boot even if the upload
to the boot server failed

2.18.4 Configuration File Parameter Changes

.cfg Action Parameter
File
sip added voIpProt.server.dhcp.available
sip added voIpProt.server.dhcp.option
sip added voIpProt.server.dhcp.type
sip added tcpIpApp.sntp.address.overrideDHCP
and
tcpIpApp.sntp.gmtOffset.overrideDHCP
2.19 Version 1.6.4

2.19.1 Added or Changed Features

• 12278: Added support for SAS-VP v3 XML configuration transactions
• 12883: Added sending and processing the "early-only" flag in the "replaces"
header to support RFC 3891 in call pickup
• 12890: Added accepting SDP with telephone-event on the first line
• 13492: Disabled CA certificate expiry checking when SNTP has not been
configured

2.19.2 Removed Features

None.

2.19.3 Corrections

The following issues have been resolved with this release:
• 7707: LED which shows mute and incoming-call and message-waiting status
can show incorrect state
• 8598: There is no "1/A/a" soft key when editing Forward contact
Copyright © 2007 Polycom, Inc.
Description
1 = check with the DHCP server for SIP
server IP address.
0 = do not check with DHCP server.
Default = 0.
Option to request from the DHCP server if
voIpProt.server.dhcp.available = 1.
Allowable range is 128 – 255. There is no
default value for this parameter, it must be
filled in with a valid value.
0 = IP address
1 = string
Type to request from the DHCP server if
voIpProt.server.dhcp.available = 1.
There is no default value for this parameter,
it must be filled in with a valid value.
These parameters determine whether
configuration file parameters override DHCP
parameters for the SNTP server address
and GMT offset. The default is 0 which
means that DHCP values will override
configuration file parameters. A value of 1
means that configuration file parameters will
override DHCP values.
Changes
Page 47