Configuration File Parameter Changes; Added Or Changed Features; Removed Features; Corrections - Polycom SOUNDPOINT 3804-11530-222 Release Notes

Release Notes - SIP Application

2.20.4 Configuration File Parameter Changes

.cfg File Action
000000000000 added
sip added
sip changed
2.21 Version 1.6.2

2.21.1 Added or Changed Features

None.

2.21.2 Removed Features

None.

2.21.3 Corrections

The following issues have been resolved with this release:
• 9580: Changes in <Ethernet address>.cfg will not be detected during
configuration polling
• 11190: Incorrect time zone is used for one to two minutes after a reboot
• 12552: Phone reboots if line keys on Expansion Module are pressed rapidly
and continuously
• 12841: Far end phone continues to ring if near end phone ends call prior to far
end answering in specific shared-line scenario
• 12951: Malformed RTP packets received by phone can cause it to crash
2.21.4 Configuration File Parameter Changes
None.
2.22 Version 1.6.1
2.22.1 Added or Changed Features
• 12296: Pressing and holding unassigned line key adds a directory contact
• 12366: Application log is uploaded shortly after reboot
Page 50
Parameter
CONTACTS_DIRECTORY,
OVERRIDES_DIRECTORY
voIpProt.SIP.dialog.useSDP
feature.9.enabled
Copyright © 2007 Polycom, Inc.
Description
New fields which can specify a directory on
the boot server in which contact overrides
(<Ethernet address>-directory.xml) and
configuration overrides (<Ethernet
address>-phone.cfg) should be stored.
0 or Null: New dialog event package draft is
used (no SDP in dialog body).
1: For backwards compatibility, use this
setting to send SDP in dialog body.
The "url-dialing" feature must be disabled by
setting feature.9.enabled="0" in order to
prevent unknown callers from being
identified on the display by an IP address.
Changes