Polycom SOUNDPOINT 3804-11530-222 Release Notes page 44

Release Notes - SIP Application
.cfg Action
File
sip added
sip added
sip added
sip added
sip added
sip removed
Page 38
Parameter
qos.ip.rtp.dscp
qos.ip.callControl.dscp
pres.reg
mb.idleDisplay.home
mb.idleDisplay.refresh
voIpProt.SIP.WM50
Copyright © 2007 Polycom, Inc.
Description
This parameter allows the DSCP of packets
to be specified. If set to a value this will
override the other qos.ip.rtp... parameters.
Default is Null which means the other
qos.ip.rtp... parameters will be used.
Possible values are 0 to 63, EF, AF11,
AF12, AF13, AF21, AF22, AF23, AF31,
AF32, AF33, AF41, AF42 or AF43.
This parameter allows the DSCP of packets
to be specified. If set to a value this will
override the other qos.ip.callControl...
parameters. Default is Null which means the
other qos.ip.callControl... parameters will be
used.
Possible values are 0 to 63, EF, AF11,
AF12, AF13, AF21, AF22, AF23, AF31,
AF32, AF33, AF41, AF42 or AF43.
Default = 1. Can be 1, 2, 3, .... Must be a
valid line/registration number. If the number
is not a valid line/registration number, it is
ignored.
Specifies the line/registration number used
to send SUBSCRIBE for presence.
mb.idleDisplay.home can be empty or any
fully formed valid HTTP URL. Length up to
255 characters.
Default is empty.
This specifies the URL used for the
microBrowser idle display home page.
Example: http://www.example.com/
xhtml/frontpage.cgi?page=home.
If empty, there will be no micro Browser idle
display feature.
Can be 0 or an integer greater than 5.
Values from 1 to 4 will be ignored, and 5 will
be used instead.
Default = 0
This specifies the period in seconds
between refreshes of the microBrowser idle
display content.
0 = the idle display microBrowser is not
refreshed.
Note: If an HTTP Refresh header is
detected, it will be respected, even if this
parameter is set to 0. The use of this
parameter in combination with the Refresh
HTTP header may cause the idle display to
refresh at unexpected times.
For selecting between Windows Messenger
4.7 and 5.0 (no longer supported).
Changes