Troubleshooting Mwb1300 Kit - Flextronics MWB1300 User Manual

Troubleshooting MWB1300 Kit

Basic setup
Symptom
The Power LED is not on
The LAN LED is not on
The WLAN LED is not on
After completing a pairing
process the link quality LED
flashes yellow
The Link quality LED is not
on or is yellow and you are
seeing artifacts on the TV
screen
The LAN, WLAN LEDs are
flashing green and the link
pg. 56 Copyright © 2009 Flextronics Special Business Solutions | Design. Build. Ship. Service
Advised solution
Make sure that:
The power cord is connected to the device and that
the power adapter is properly connected to a
functioning power outlet.
You are using the power adapter that was supplied
with the product.
Make sure that:
The LAN cable connectors are securely plugged in at
the wireless video extender device and at the
network device (gateway, modem or set top box).
The connected network device is turned on.
You are using the correct cable type for your
Ethernet equipment that is at least UTP CAT5 with
RJ45 connectors.
Make sure that you have completed a successful
pairing procedure as described in Pairing your
Devices on page 17 herein.
Make sure that you are not attempting to pair more
then one MWS1000 device at the same time.
Make sure that the wireless video extender devices
are placed according to the recommendation in
Placing and connecting your devices on page 18
herein.
The device is experiencing a severe malfunction.
B