Changing Your Computer's Ip Address - Flextronics MWB1300 User Manual

Changing Your Computer's IP Address

In order to connect your management computer to the MWB1305 device, you must change
the IP address of your computer so that it is on the same subnet as the MWB1305 device
(by default 10.x.x.x). Since this disconnects your computer from your computer network,
you may need to restore this setting later.
To change the IP address of your computer:
1. Connect an Ethernet cable between the Ethernet port of the MWB1305 device and the
Ethernet port of your computer.
2. From your computer's desktop, click Start > Settings > Network Connections and
double-click the LAN connection for your computer network. The Local Area
Connection Status window appears.
3. From the General tab, click Properties. The Local Area Connection Properties window
appears.
Select Internet Protocol (TCP/IP) and click Properties. The Internet Protocol (TCP/IP)
4.
Properties window appears.
5. Make a note of the current settings in this window. You will need to know these
settings when reconnecting your computer to your computer network.
Copyright © 2009 Flextronics Special Business Solutions | Design. Build. Ship. Service
Figure 10: Internet Protocol (TCP/IP) Properties Window
pg. 21