Table of Contents
Advertisement
System Information Panel – Displays system status information. This panel is always
visible and displays the following information:
State – Indicates whether the system is currently active or stopped.
Band – Indicates that the system is currently transmitting in the 5Ghz radio band.
Channel – The index number of the channel currently in use.
BSSID – Basic Service Set Identifier. The MWB1305 MAC address in an
infrastructure mode BSS. This field uniquely identifies each BSS. You cannot
configure this parameter using the MWB1305 Management Application.
SSID – Service Set Identifier. The code attached to beacon frames and connection
establishment frames.
SW Version – The current software image version of the device.
Image ID - Updated, the currently active software image is up to date. Factory, the
currently active software image is the factory default and should be updated.
Data Area – For each configuration screen, the Data Area displays the relevant
parameters and controls.
Control Buttons – Enable you to perform operations related to the current
configuration screen.
pg. 26
Copyright © 2009 Flextronics Special Business Solutions | Design. Build. Ship. Service
Advertisement
Table of Contents
