Table of Contents
Advertisement
The Monitor, Counters window is divided into the following sections:
System Counters, Downlink
System Counters, Uplink
Station Counters
Control Buttons
The following table describes the Monitor, Counters Window:
Parameter
System Counters, Downlink
Frames
Age Dropped Frames
Filtered Frames
Air Interface Total
PER
System Counters, Uplink
Frames
Filtered Frames
CRC Errors
Station Counters
MAC Address
Type
Status
pg. 46
Copyright © 2009 Flextronics Special Business Solutions | Design. Build. Ship. Service
Table 12: MWB1305 Configuration – Counters Parameters
Description
Total – The total number of frames transmitted.
pps – Packets per second transmitted.
bps – Bits per second transmitted.
Total – The total number of frames dropped because of lifetime expiration.
pps – Packets per second dropped because of lifetime expiration.
Total – The total number of frames dropped because the destination was not
an associated MWS1000.
pps – Packets per second dropped because the destination was not an
associated MWS1000.
The total number of frames transmitted over the air.
The percentage of failed frame transmissions.
Total – The total number of frames received.
pps – Packets per second received.
Total – The total number of frames dropped because the source was not an
associated MWS1000.
pps – Packets per second dropped because the source was not an associated
MWS1000.
Total – The total number of received frames with bad CRC .
pps – Packets per second received with bad CRC.
The MWS1000 MAC Address.
The MWS1000 type – Possible values: Data or VIDEO.
The MWS1000 status – Possible values: Associated, Disassociated,
Authenticated, Disauthenticated.
Advertisement
Table of Contents
