Preface Welcome to the Wireless Video Extender solution set from Flextronics. The User’s Guide will help you to understand the Wireless Video Extender solution, how to install it, configure it and troubleshoot problems. Who should use this guide This User’s Guide assumes that the reader has basic to intermediate computer and internet skills.
The MWB1300 devices has been designed to be placed on a desktop. All of the cables exit from the rear of the devices. The status display LEDs are located at the front of the devices and are easily visible.
Page 20
Completing the installation: You have finished installing your MWB1300 kit. To test your connectivity, turn on the TV and set top box and watch any available channel. Note: To install additional MWS1000 devices, repeat the above procedure for each new MWS1000 device.
Updating the MWS1000 This appendix describes how to upload a new firmware version into the MWS1000 device. To upload a new firmware version into the MWS1000 device 1. Connect a Category 5 (CAT5) Ethernet cable from the Ethernet port of the MWS1000 to your computer.