Table of Contents
Advertisement
To place and connect your MWS1000 device:
1. Place the MWS1000 Client device on an easily-accessible surface near the set top box.
2. Plug one end of the Ethernet cable into the LAN port of the set top box device and the
other end into the Ethernet port of the MWS1000.
Figure 9- Connecting and placing the MWS1000 device
3. Make sure that the LAN LED on the MWS1000 is turned on:
Copyright © 2009 Flextronics Special Business Solutions | Design. Build. Ship. Service
pg. 19
Advertisement
Table of Contents
