Flextronics MWB1300 User Manual page 31

The following table describes the parameters you can configure in the Immediately
Effective area:
Table 6: MWB1305 Configuration – Immediately Effective Wireless Parameters
Parameter
Broadcast SSID
Rate
Rate Adaptation
Retransmissions
Frame Lifetime
2. Click Apply to update the settings immediately. The system displays an update message.
3. Click OK to close the message and refresh the current window.
The following table describes the parameters you can configure in the Effective After
Restart area:
Table 7: MWB1305 Configuration – Effective after Restart Wireless Parameters
Parameter
WDS Enabled
SSID
Country
Channel
Copyright © 2009 Flextronics Special Business Solutions | Design. Build. Ship. Service
Description
When checked, the system broadcast its SSID in beacon and probe
response frames.
The transmission rate. Possible values: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps.
When checked, the system dynamically adapts the transmission rate to
suit current network conditions.
The number of retries in the case of transmission failure. Possible values: 0 – 6.
The maximum amount of time that a frame can be stored in the MWB1305
before it is discarded. Possible values: 10 – 500 milliseconds.
Description
When checked, the system works as a Wireless Distribution System
thus providing a Transparent Bridge Functionality.
Service set identifier. The code attached to beacon frames and
connection establishment frames. The SSID is a string of ASCII
characters. Entering an empty string restores the value of the SSID
field to factory default.
Your country of operation.
This device will automatically limit the allowable channels
determined by the current country of operation. Incorrectly entering
the country of operation may result in illegal operation and may
cause harmful interference to other systems.
Select the desired channel from the dropdown list, or let the system
select the best working channel automatically by choosing 'Auto'
from the drop down list.
pg. 31