Table of Contents
Advertisement
To power up the MWS1000 device:
1. Plug in the 5V A/C adapter and connect it to the MWS1000 Client device.
Use the recommended AC/DC power adaptor which was supplied in the kit:
"Using a power supply with a different voltage rating then the one included with the
MWS1000 device will cause damage and void the warranty for this product".
Note: There is no On/Off switch. Once you connect the power adapter, the MWS1000
device powers up.
2. Wait several seconds while the MWS1000 device performs a reset.
Figure 6 - Powering up the MWS1000 Device
pg. 16
Copyright © 2009 Flextronics Special Business Solutions | Design. Build. Ship. Service
Advertisement
Table of Contents
