Powering Up Your Devices - Flextronics MWB1300 User Manual

Powering Up your devices

To power up the MWB1305 device:
1. Plug in the 12V A/C adapter and connect it to the MWB1305 Access Point device.
Use the recommended AC/DC power adaptor which was supplied in the kit.
"Using a power supply with a different voltage rating then the one included with the
MWB1305 device will cause damage and void the warranty for this product".
Note: There is no On/Off switch. Once you connect the power adapter, the MWB1305
device powers up.
2. Wait several seconds while the MWB1305 device performs a reset.
Figure 5- Powering up the MWB1305 Device
Copyright © 2009 Flextronics Special Business Solutions | Design. Build. Ship. Service pg. 15