Access Point Configuration - Polycom INTERMEC 2100 Configuration Manual

Field Verified

Access Point Configuration

6
The following AP configuration steps need to be repeated for each AP
radio that you are planning to use with VoIP.
1. Connect to the AP using the Web browser interface. Consult the
access point documentation for details.
2. Go to
IEEE 802.11B Radio
the same as the setting for the SpectraLink 8000 Wireless
Telephones.
3. Go to
IEEE 802.11B Radio: Advanced Configuration
option to
Settings Data and SpectraLink Traffic
4. Go to
IEEE 802.11B Radio: Advanced Configuration
to
Rate 11Mb/s.
5. Go to
Spanning Tree Settings: Global Flooding
Universal (Inbound)
6. Save changes and reboot.
The AP is now ready for use with SpectraLink 8000 Wireless
Telephones.
and set the
SSID (Network Name)
.
, set
PN: 1725-36053-001_G.doc
Configuration Guide
on the AP
and set
Data/Voice
and set the
Basic
to
Multicast Flooding