Speaker Assembly With C-Ring; Speaker Assembly With Tile Bridge And C-Ring - Tannoy CMS60 ICT–30 User Manual

3.4 Speaker Assembly with C-ring

To spread the weight / pressure of the 4 tags (dogs), an optional C-ring is available for the CMS60
ICT – 30 / CMS60 ICT - 4. To install the speaker in the ceiling, place the C-ring behind the
surface by separating opening of the C-ring and twisting it through the hole. Slide the speaker
assembly through the hole and tighten the tag (dog) screws, until a firm grip is achieved,

3.5 Speaker Assembly with Tile Bridge and C-ring

If the speaker requires additional support, an optional tile bridge is also available for use in
conjunction with the C-Ring. This is assembled as shown in below. The Tile Bridge is
attached to the C-ring, and the tile bridge supports are placed either on the supporting
framework for the false ceiling or inside the framework, depending on the ceiling grid spacing.
Slide the speaker assembly through the hole and tighten the tag (dog) screws, until a firm grip is
achieved.
Figure k