Accessory Board Guidelines; Tested Pci Boards; Irq Settings - HP Netserver LP2000r Service Manual

Chapter 2

Accessory Board Guidelines

The HP Netserver LP 2000r provides up to three 33 MHz, 32/64 bit, 5V PCI slots which are located on an
extension board.

Tested PCI Boards

For a list of tested PCI boards, check for compatibility under the Hardware Tested Products list for the HP
Netserver LP 2000r under the Service and Support topic for the specific NOS used in the Netserver at HP's
web site:
http://www.hp.com/netserver/support/compatibility
CAUTION

IRQ Settings

The IRQ settings are automatically assigned and don't require user intervention. The HP Netserver uses the
Plug-and-Play feature of the PCI boards to correctly assign its resources automatically.
Some accessory board outputs may exceed U.S. National Electrical code (NFPA
70) Class 2 or limited power source limits and must use appropriate inter-connecting
cabling in accordance with the National Electrical Code. (All HP boards comply with
Class 2.)
System Information
11