Table of Contents
Advertisement
USING THE PROJECTOR
Notee:
Rear-Desktop and Rear-Ceiling are to be used with a translucent screen.
Screen Type
Choose the screen type from 16:10 or 16:9 (WXGA/WUXGA).
Notee:
"Screen Type" is for WXGA/WUXGA only.
Menu Location
Choose the menu location on the display screen.
Projector ID
ID definition can be set up by menu (range 0-99), and allow user control an individual projector by RS232.
HDBaseT Control
The projector can automatically detect the Ethernet or RS232 signal from the HDBaseT transmitter supplied. For an
automatic detection, make sure the respective signal is enabled.
Exit
Choose "Exit" to exit the menu.
Setup Security menu
Security
‡
On: Choose "On" to use security verification when the turning on the projector.
‡
Off: Choose "Off" to be able to switch on the projector without password verification.
Security Timer
Can be select the time (Month/Day/Hour) function to set the number of hours the projector can be used. Once this
time has elapsed you will be requested to enter your password again.
Change Password
‡
First time:
1.
Press "Enter" key to set the password.
2.
The password has to be 4 digits.
3.
Use number button on the remote or on-screen numeric keypad to enter your new password and then
press "Enter" key to confirm your password.
44
English
SETUP
Security
Security
Security Timer
Change Password
Security Timer
Month
Day
Hour
Off
E x i t
Exit
Advertisement
Table of Contents
