Table of Contents
Advertisement
USING THE PROJECTOR
5.
Click "Properties".
6.
Type in the IP address and Subnet mask, then press "OK".
7.
Press the "Menu" button on the projector.
8.
Use
9.
After getting into LAN Settings, input the following connection parameters:
±
DHCP: Off
±
IP Address: 10.10.10.10
±
Subnet Mask: 255.255.255.255
±
Gateway: 0.0.0.0
±
DNS: 0.0.0.0
10.
Press "Enter" to confirm settings.
11.
Open a web browser, for example Microsoft Internet Explorer.with Adobe Flash Player 9.0 or higher
installed.
12.
In the Address bar, input the projector's IP address: 10.10.10.10.
13.
Press "Enter".
The projector is setup for remote management. The LAN/RJ45 function displays as follows:
52
English
keys to select SETUP > Network > LAN Settings.
Advertisement
Table of Contents
