Optoma W515ST-M User Manual page 91

ADDITIONAL INFORMATION
LED lightning messages
Message
Standby state
(Input power cord)
Power on (Warming)
Power on and Lamp
lighting
Power off (Cooling)
Quick Resume (100
secs)
Error (Lamp failure)
Error (Fan failure)
Error (Over temp.)
Standby State
(Burn in mode)
Burnin (Warming)
Burnin (Cooling)
‡ Power off:
Press Power key again
‡ Lamp warning:
Lamp Warning
Lamp life exceeded.
‡ Temperature warning:
Please:
1. Make sure air in and outlets are not blocked.
2. Make sure the environment temperature is under 45 degree C.
If the problem persists in spite of the above.
Please contact a service center for repair.
Power LED
(Red)
Steady light
Flashing
Flashing
Flashing
Power Off?
Warning! TEMPERATURE TOO HIGH
Power LED Temp-LED
(Blue) (Red)
Flashing
(0.5 sec off /
0.5 sec on)
Steady light
Flashing
(0.5 sec off /
0.5 sec light). Back
to red steady light
when cooling fan
turns off.
Flashing
(0.25 sec off /
0.25 sec light)
Flashing
Steady light
Flashing
Flashing
Flashing
Lamp-LED
(Red)
Steady light
English
91