Setup Network Control Settings Menu - Optoma W515ST-M User Manual

Table of Contents

USING THE PROJECTOR

Setup network control settings menu

LAN_RJ45 function

For simplicity and ease of operation, the W320UST projector provides diverse networking and remote management

features. The LAN/RJ45 function of the projector through a network, such as remotely manage: Power On/Off,

Brightness and Contrast settings. Also, projector status information, such as: Video- Source, Sound-Mute, etc.

Wired LAN terminal functionalities

This projector can be controlled by using a PC (laptop) or other external device via LAN/RJ45 port and compatible

ith Crestron / Extron / AMX (Device Discovery) / PJLink.

‡

Crestron is a registered trademark of Crestron Electronics, Inc. of the United States.

‡

Extron is a registered trademark of Extron Electronics, Inc. of the United States.

‡

AMX is a registered trademark of AMX LLC of the United States.

‡

PJLink applied for trademark and logo registration in Japan, the United States of America, and other

countries by JBMIA.

The projector is supported by the specified commands of the Crestron Electronics controller and related software,

for example RoomView

http://www.crestron.com/

This projector is compliant to support Extron device(s) for reference.

http://www.extron.com/

This projector is supported by AMX ( Device Discovery ).

http://www.amx.com/

This projector supports all commands of PJLink Class1 (Version 1.00).

http://pjlink.jbmia.or.jp/english/

For more detailed information about the various types of external devices which can be connected to the LAN/RJ45

port and remote/control the project, as well as the supported commands for these external devices, please contact

the Support-Service directly.

English

Projector

(Ethernet)

Table of Contents