Image Advanced Signal (Rgb) Menu - Optoma W515ST-M User Manual

USING THE PROJECTOR
Exit
Choose "Exit" to exit the menu.

Image advanced signal (RGB) menu

Notee:
‡ "Signal" is only supported in Analog VGA (RGB) signal.
‡
If "Signal" is automatic, the phase, frequency items are grayed out. If "Signal" is not automatic, the
phase, frequency items will appear for the user to manually tune and are saved in the settings after
that for the next time projector is turned off and on again.
Automatic
Automatically selects the signal. If you use this function, the Phase, frequency items are grayed out, and if Signal is
not automatic, the phase, frequency items will appear for user to manually tune and saved in settings after that for
next time projector turns off and on again.
Phase
Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or flickers,
use this function to correct it.
Frequency
Change the display data frequency to match the frequency of your computer's graphic card. Use this function only
if the image appears to flicker vertically.
H. Position
‡ Press the
‡ Press the
V. Position
‡ Press the
‡ Press the
Exit
Choose "Exit" to exit the menu.
Advanced e: Signal
Automatic
Phase
Frequency
H. Position
V. Position
to move the image left.
to move the image right.
to move the image down.
to move the image up.
IMAGE
On
E xi t
33
English