Options Advanced Menu - Optoma W515ST-M User Manual

USING THE PROJECTOR
Notee:
‡ "Front" and "Top" cannot be selected in standby mode.
‡ IR mode can be switched to "NVIDIA 3D Vision" once implemented and verified by NVIDIA.
Remote Code
‡ Press
Exit
Choose "Exit" to exit the menu.

Options advanced menu

Direct Power On
Choose "On" to activate Direct Power mode. The projector will automatically power on when AC power is supplied,
without pressing the " " key on the projector Control Panel or on the remote control.
Signal Power On
Choose "On" to activate Signal Power mode. The projector will automatically power on when a signal is detected,
without pressing the " " key on the projector Control Panel or on the remote
Auto Power Off (min)
Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the
projector. The projector will automatically power off when the countdown has finished (in minutes).
‡ Press the
‡ Press the
Notee:
‡ The value of sleep timer will be reset to zero after the projector is powered off.
‡
The projector will automatically power off when the countdown has finished.
Sleep Timer (min)
Sets the countdown timer interval. The countdown timer will start, with or without a signal being sent to the
projector. The projector will automatically power off when the countdown has finished (in minutes).
‡ Press the
‡ Press the
Notee:
‡ Check "Always On" option to disable automatic power off.
58 English
to set Remote custom code and press "Enter" to change to the setting.
Direct Power On
Signal Power On
Auto Power Off (min)
Sleep Timer (min)
Power Mode (Standby)
to decrease the timer interval.
to increase the timer interval.
to decrease the timer interval.
to increase the timer interval.
OPTIONS
Advanced
Off
Off
Active
Exit
control.