Login Procedure - HP MSR Series Configuration Manual

Step
23. Configure the user interface to
change carriage returns 0x0d
0x0a and 0x0d 0x00 received
from Telnet clients to 0x0d
during redirecting a Telnet
connection.
24. Configure the user interface to
change carriage returns 0x0d
0x0a and 0x0d 0x00 received
from a terminal (a PC
connected to the console port
for example) to 0x0d during
redirecting a Telnet connection.
25. Set the idle timeout timer for
Telnet redirect.
26. Manually terminate redirected
Telnet connections.

Login procedure

To log in through the AUX port:
Complete the authentication settings on the AUX user interface. By default, password authentication
•
is enabled, but no password is set. To use password authentication, you must set a password for
password authentication.
• Make sure the configuration terminal has a terminal emulation program (for example,
HyperTerminal in Windows XP).
Port settings of the terminal emulation program must be the same as the settings of the AUX
•
port. Table 18
Table 18 Default AUX port properties
Parameter
Bits per second
Flow control
Parity
Stop bits
Data bits
To log in through the AUX port from the configuration terminal (for example, a PC):
1. Connect the DB-9 female connector of the console cable to the serial port of the PC.
2. Connect the RJ-45 connector of the console cable to the AUX port of the device.
Command
redirect return-deal from-telnet
redirect return-deal
from-terminal
redirect timeout time
redirect disconnect
lists the default AUX port properties.
Default
9600 bps
•
Independent AUX port: Hardware flow control
•
Console and AUX integrated port: Off
None
1
8
51
Remarks
By default, the user interface does
not change carriage returns
received from Telnet clients during
redirecting a Telnet connection.
By default, the user interface does
not change carriage returns
received from a terminal during
redirecting a Telnet connection.
360 seconds by default.
If no data is received from a Telnet
client before the timer expires, the
user interface terminates the
redirected connection.
N/A