HP MSR Series Configuration Manual page 146

Figure 53 Patches that are not loaded to the patch memory area
DEACTIVE state
Patches in DEACTIVE state have been loaded to the patch memory area but have not yet run in the system.
Suppose that the patch file you are loading has seven patches. After the seven patches successfully pass
the version check and CRC check, they are loaded to the patch memory area and are in DEACTIVE state.
In the patch memory area, patch states are as shown in
Figure 54 Patch states in the patch memory area after a patch file is loaded
ACTIVE state
Patches in ACTIVE state run temporarily in the system and become DEACTIVE after system reboot. For the
seven patches in
ACTIVE. The patch states in the system are as shown in
The patches in ACTIVE state change to the DEACTIVE state after system reboot.
Figure 54, if you activate the first five patches, their states change from DEACTIVE to
Figure 54.
Figure 55.
139