HP MSR Series Configuration Manual page 14

Step
2. Configure hotkeys.
3. Display hotkeys.
The hotkeys in Table 3
you are using to interact with the device, the definition of the terminal software takes effect.
Table 3 System-reserved hotkeys
Hotkey
Ctrl+A
Ctrl+B
Ctrl+C
Ctrl+D
Ctrl+E
Ctrl+F
Ctrl+H
Ctrl+K
Ctrl+N
Ctrl+P
Ctrl+R
Ctrl+V
Ctrl+W
Ctrl+X
Ctrl+Y
Ctrl+Z
Ctrl+]
Esc+B
Esc+D
Esc+F
Esc+N
Command
hotkey { CTRL_G | CTRL_L |
CTRL_O | CTRL_T | CTRL_U }
command
display hotkey [ | { begin |
exclude | include }
regular-expression ]
are defined by the device. If a hotkey is also defined by the terminal software that
Function
Moves the cursor to the beginning of a line.
Moves the cursor one character to the left.
Stops the current command.
Deletes the character at the cursor.
Moves the cursor to the end of a line.
Moves the cursor one character to the right.
Deletes the character to the left of the cursor.
Aborts the connection request.
Displays the next command in the command history buffer.
Displays the previous command in the command history buffer.
Redisplays the current line.
Pastes text from the clipboard.
Deletes the word to the left of the cursor.
Deletes all characters to the left of the cursor.
Deletes all characters to the right of the cursor.
Returns to user view.
Terminates an incoming connection or a redirect connection.
Moves the cursor back one word.
Deletes
all characters from the cursor to the end of the word
Moves the cursor
forward one word
Moves the cursor down one line. This hotkey is available before you press Enter.
.
7
Remarks
By default:
•
Ctrl+G is assigned the display
current-configuration
command.
•
Ctrl+L is assigned the display ip
routing-table command.
•
Ctrl+O is assigned the undo
debugging all command.
•
No command is assigned to
Ctrl+T or Ctrl+U.
Optional.
Available in any view. See
for hotkeys reserved by the system.
.
Table 3